MOTM

Sorry for duplicate postings.  Requested prices include shipping and
shipping insurance via USPS or UPS within the continental USA.
Otherwise, shipping and shipping insurance will additional
to the stated prices.  All units are in good functional condition.

FS:
(1) MOTM 800 ADSR.  MOTM assembled - no modifications.  Slight screw
marring around the mounting screw holes, but these are covered with the
mounting screw inserted. $90.  No documentation included.

(1) Oakley multimix, issue 1.  It is set up as the
reversible-attenuator/mixer in a Stooge panel
http://www.wiseguysynth.com/larry/panel/gif/OMS-mix.gif
with Switchcraft 112 sockets and motm-style Alco knobs. One physical
modification I did was to 'shave off' about 1mm of the top of the pcb so
that the unit would fit under motm rack rails.  Info at
http://www.oakleysound.com/multimix.htm . $80.

(1) Oakley multiladder filter, issue of June 2000.  Info at
http://www.oakleysound.com/ladder.htm . Front panel is a Schaeffer
motm-style panel that is similar to the one pictured on the above Oakley
url but this panel contains tick marks and numbering (0 - 10) [similar
to,say, the motm 120 ( http://www.synthtech.com/motm120.html ), but with
all numbers included except where the pot label is located] and some
labels are different (e.g., 1 POLE instead of RUNG 1).  Layout of the
front panel is nearly the same as pictured on the url - sorry, I don't
have a photo of this unit nor the Schaeffer .fpd file.  The panel,
however, is in excellent condition. The unit contains switchcraft 112
sockets and motm-style Alco knobs. Documentation included. $180.

Payment via money order or Paypal accepted. e-mail me at the above
e-address.  Please ask any reasonable questions.
Thanks, Jeff