MOTM

Now that I think about it ball corners don't matter since they are for
stacking cases with lids on.  I asked the case company and the large
rubber feet used on the bottom of these cases will clear the ball
corners anyway.  Latches and catches to link stacked cases would add
about $40, so I doubt I'll do it.

If you want to rear mount an accessible power supply then get a
regular rack.  Typically these are much deeper than 12" which is part
of
the reason I had this case quoted.  The other reason is that a
removable back adds quite a bit of cost.

Ivan

--- In motm@yahoogroups.com, ivancu@a... wrote:
> I was thinking of changing the spec to stacking ball corners.  It is
also possible to add latches to connect stacked cases, but that of
course adds to price.
> 
> I will be using a power supply mounted to the inside bottom rear of
the case, with a power connector mounted in the case itself.