MOTM

Hey All -

OK, 510 came today and it's built and in the rig!  Pretty easy build 
if you have a few under your belt. The wiring is the hardest (most 
tedious) part.  Watch out for R13 and R29: I switched 'em, the 
labels are funny.  Also, the manual says the 68K resitors (7 of 
them) are green, gray, black: that should be BLUE, gray, black.  My 
switch pot is a little scratchy, too.  I'll see if that works itself 
out; if not, I'll ping Paul.

Try this if you have one: SIN into Y IN, then mess around with each 
of the X, Y, and Z WARP knobs.  Try it with the POWER knob at each 
of the three positions. I find I can get timbres anywhere from an 
Oakley Wave Folder to a CGS Wave Folder and a whole bunch of other 
stuff in between.  Try putting an LFO into the Z OFFSET jack.  Big 
timbre from a single sine wave!

Now add SAW to X and PULSE to Z from the same oscillator as the sine 
wave.  Or a different one.  Somebody please get me away from my rig!

Mike