MOTM

Correct all down the line. Especially the beer part.

Paul S.

----- Original Message ----- 
From: <groovyshaman@...>
To: "motm group" <motm@yahoogroups.com>
Sent: Saturday, October 16, 2004 10:05 AM
Subject: [motm] adding 5V power to existing system


> 
> I wanted to confirm a few things:
> 
> 1)
> pin 1 = +15
> pin 2 = GND
> pin 3 = GND
> pin 4 = -15
> pin 5 = digital GND
> pin 6 = +5V
> 
> is the correct spec for the new MTA-156 power connector.
> 
> 2) I have two supplies, a 5V and a +-15V.  The grounds of the two supplies
> should be connected together as close to the supplies as possible.
> 
> 3) 12AWG or 14AWG?
> 
> 4) Once completed, crack open beer.
> 
> ??
> 
> George
> 
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
>