MOTM

Howdy Ho!

They all sold out fast!

Euro'Dapter Cards NOW on Back-Order Status Only!

Should be shipping about 60 days...

(Thanks for your support)

Cyn'ders

----------
> From: Cynthia Webster <cynthia.webster@...>
> Date: Fri, 13 Aug 2004 17:34:58 -0700
> To: <motm@yahoogroups.com>
> Subject: Euro'Dapter Card Link
> 
> 
> Here is a page for Cynthia Euro'Dapter Cards
> 
> http://www.cyndustries.com/eurodapter.cfm
> 
> For electrical and mechanical conversions
> 
> Think of it as a Universal Format Transporter Card...
> 
> Need 12 Volt Doepfer to 15 volt MOTM?
> Want Analog Systems to MOTM, Modcan, or Blacet?
> 
> or Verse Visa, and more?
> 
> Easy!
> 
> As you can see there are pictures of
> 12V Analog Systems to 15V Modcan and a
> Doepfer Dual Quantizer module converted to Modcan.
> 
> Note how with the right stand-offs and hardware
> you can easily mount the Doepfer module
> directly to the back of an MOTM panel.
> 
> (Hardware Included)
> 
> Hook-up each type of power connector to the
> Cynthia Euro'Dapter Card, and simply wire the pots
> and switches right across to your new panel.
> 
> Holes in the board anticipate you hanging
> a EuroCard module complete with front panel
> right onto the back of the new module.
> 
> There are extra sets of offset holes to accommodate
> the centering of different panel widths
> 
> These were made for internal use only
> here at Cyndustries.com  but why not
> make these generally available?
> 
> So here they are!
> 
> only (4) in stock right now,
> then taking advance orders for the next run
> (don't even ask me when they'll ship! LOL!)
> 
> Fully Assembled Circuit Boards
> with mounting Hardware
> $60.00 each (includes shipping in the USA)
> 
> www.cyndustries.com/eurodapter.cfm
> 
> 
> Cynthia
> 
> 
>> Message: 1      
>> Date: Thu, 12 Aug 2004 20:27:54 -0000
>> From: "elherbus" <jvasche@...>
>> Subject: Analogue Systems to MOTM format?
>> 
>> Hi everyone,
>> 
>> How difficult is it to convert AS modules to MOTM format?  (I'm
>> intrigued by the RS310 reverb/chorus...)  I assume that in addition
>> to the wiring for pots and jacks I would have to change the power
>> connector, but I don't know what else would be involved.  Looking at
>> their website, it doesn't appear that the modules are offered as
>> kits, only preassembled.  Is this going to be a huge headache?
>> 
>>