MOTM

I purchased a kit from Dave and the transaction was exceptional.  The
module is now built and in my cabinet.  If you've heard any of the
GX-1 demos, they all have the nnew uMixer in the patch!

Thanks, Dave, hope your situation resolves pronto.

Mike

--- In motm@yahoogroups.com, Dave Oleksy <faldska@y...> wrote:
> Well the first round went pretty well.  The #1
> requested item was the Tellun TLN-156 Neural Agonizer.
>  Eight people asked for it.  Well this is what I have
> left:
> 
> New Stuff:
> 
> MOTM-19A - Rack Rails - $30 - I would prefer to sell
> these locally (Bay Area) but if you want to pay for
> shipping I'll sell them.
> 
> Stooge Patch Cables - I have about $200 - $300 worth
> of Stooge Patch Cables, in various lengths.  E-mail me
> if interested and I'll list them all.
> 
> Assembled (by me, unless otherwise noted):
> MOTM-110 - Ring Mode / VCA ==> $200
> MOTM-120 - Sub-Octave Multiplexer ==> $170
> MOTM-300 - Ultra VCO ==> $300
> MOTM-310 - micro VCO ==> $200
> MOTM-380 - Quad LFO ==> $115
> MOTM-420 - Voltage Controlled Filter (x2)
>            1 assembled by me ==> $200
>            1 bought used and I believe it had
>            originally been purchased
>            assembled - a couple of small scratches on
>            front panel ==> $190
> MOTM-440 - Discrete OTA Lowpass Filter ==> $240
> MOTM-490 - micro VCF ==> $150
> MOTM-700 - Dual VC Router ==> $150
> 
> Kits:
> Blacet/Wiard Miniwave - MOTM Kit (no front panel,
>                         pots, knobs, or jacks)
>                         ==> $140
>                       - Stooge Front Panel + 4-pot
>                         long PCB mounting bracket
>                         ==> $30
>                         =========> All for $160
> 
> PCBs:
> 
> Oakley PCBS  -
>              - Little LFO PCB (Issue 4) + Omeg pot
>                kit x3 ==> $20 ea, $55 for all 3
>              - EFG (Issue 2) + Little Lag (Issue 1) +
>                Omeg pot kit (for both) ==> $60
>              - State Variable Filter (Issue 1) + Omeg
>                pot kit ==> $45
>              ===> $150 for all Oakley PCBs + pot kits
> 
> RJWSoft - Sound Lab Mini-Synth - Has two VCOs, one
> LFO, one Mixer, one State Variable Low-Pass/Band-Pass
> Filter, one AR Envelope Generator with repeat, and
> one VCA and runs off two 9 Volt batteries.  (PCB
> ONLY) ==> $20
> 
> 
> Make me an offer for all of it.
> 
> Again, thanks for helping me out.
> 
> dave
> 
> 
> 		
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail - 50x more storage than other providers!
> http://promotions.yahoo.com/new_mail