MOTM

Hi Tony, one last thing I wanted to ask about the FS layout. On the 
UEG, the power connector is positioned in such a way that makes it 
impossible to mount a UEG along the right edge of a cabinet (if the 
cabinet has no air gap between the mounting rails and the right side 
of the cabinet). This is not a deal breaker, but if possible, it 
would be better if the power connector were not in the same place on 
the FS. However, if it were in the same place, but rotated 180 
degrees, it would still allow putting the module in any location in a 
cabinet.

Thanks.