a) The basic audio path is VCO >> VCF >> VCA.
b) the VCA is what turns notes off and on *when* controlled by an EG. The +OUT of the EG goes
into the CV IN of the VCA.
c) the GATE output of the Voyager goes into the GATE IN of the MOTM-800 EG.
d) from the same EG, take the -OUT signal and patch it into the FM IN of the VCF.
This should get you rolling.
Paul S.
b) the VCA is what turns notes off and on *when* controlled by an EG. The +OUT of the EG goes
into the CV IN of the VCA.
c) the GATE output of the Voyager goes into the GATE IN of the MOTM-800 EG.
d) from the same EG, take the -OUT signal and patch it into the FM IN of the VCF.
This should get you rolling.
Paul S.