Kevin Lightner <synthfool@...> was kind enough to measure a Moog
slant from cabinet he had in his shop. I thought this information might be
useful to those considering cabinet designs. See the GIF file attached.
In addition, the following is a quote from Kevin concerning the thickness
of the top, sides, and bottom wood.
Kevin Lightner wrote:
"On this cab it's 11/16" on the sides, 3/4" on the
bottom and top. There's a 3/8" cutaway in the top
section to allow the modules to fit on inset rails."
slant from cabinet he had in his shop. I thought this information might be
useful to those considering cabinet designs. See the GIF file attached.
In addition, the following is a quote from Kevin concerning the thickness
of the top, sides, and bottom wood.
Kevin Lightner wrote:
"On this cab it's 11/16" on the sides, 3/4" on the
bottom and top. There's a 3/8" cutaway in the top
section to allow the modules to fit on inset rails."