MOTM

In a message dated 10/24/99 9:35:11 PM, jlarryh@... writes:

>However, it sounds like two of the stooges may interested in similar
>cabinet designs.  My lower cabinet will be 2 rows 24U wide (sloped).  My
>top cabinet will be 1 row 24U wide (not sloped).  Each will have one magic
>bus 12 X 4 multiple.  


Yes, these sound almost exactly like what I'm thinking of except for my 
sloped cabinet I'm thinking of two of your magic bus strips (one for each row 
of MOTM). And I'm thinking of a second single row MOTM cabinet as well.

In a message dated 10/25/99 5:42:13 AM, Ken.Tkacs@... writes:

>I would think it would be easier (cheaper) to simply connect the two rails
>to a wedge, no? The rails I bought have mounting flanges that go back almost
>2", which is pretty deep. Even a few wooden wedges spaced along the length
>should do it.


Interesting idea! Wedges might not be as sturdy as I'd like -- another idea 
is to bend some small corner braces (the 3/4" to 1" ones) which seem to 
retain their strength even after being bent. I liked Larry's routing option 
too, though I think you'd notice the top edge being thinner than the sides of 
the cabinet.

No thoughts on attaching rails to the sides of the cabinet I guess.
JB