MOTM

"Paul Wagorn" <pwagorn@...> wrote:
<snip>
> 6) How about trying it with a different VCA? A MOTM 190? The Minimoog?
>
> no problems
<snip>

Hi Paul,

Ok, if you tried a different VCA and had "no problems", by this you mean the
click/pop went away, right?  If so, it might be that the original 110 VCA is
having some CV bleed-through and needs adjustment as described in the
manual.

The 110 may be clipping for some reason.  If you put two different freq
[preferably] sine waves into the RM section of the 110 "in question", does
it experience any popping sounds?

Another thought, do you have a mixer?  Try attenuating the signals going
into the VCA.  Popping go away?

Did you try Paul Schreiber's suggestion?  Did it have any effect?

I'm curious, exactly what VCA did you use in place of the one 110 creating
the popping?  A different 110? a 190? an external VCA?

Grasping a bit, but how many modules are in your system, and what power
supply are you using?

George