MOTM

In a message dated 10/23/99 9:23:17 AM, n0nspaz@... writes:

>you're talking about heat sink compound, a white goopy stuff that helps
>dissipate the heat of components that get hot. i know it's needed for the
>300 VCO, not for the 410, perhaps for others . mouser part #524-8109-S
> $6.50

As Larry said, it's also used on the 420 and I think it'll be needed for the 
320 VCLFO if I'm not mistaken. If you get a tube of it, I suggest storing it 
with the cap down since i tried storing it with the cap up and found that 
after a few months it separated a bit, such that most of the goop went to the 
bottom of the tube but a very small amount of a very slippery film went to 
the top -- just about enough to cover the top of a tranny pair so when the 
goop comes out it immediately slides off sticking to everything but the 
tranny pair.

JB