MOTM

This is true.  See my very bad pic of an unfinished Cyndustries Quad 
Low Pass Gate in a Schaeffer panel (Files Section)...

However, had I known Paul was contemplating this, I would have 
waited.

Mike

--- In motm@yahoogroups.com, "Josue Arias" <josue@A...> wrote:
> I don`t see the point of cloning the Buchla LP gates, the work is 
done yet:
> Cynthia Webster (www.cyndustries.com) is selling the Quad Buchla 
Lopass
> gates. OK, it`s in modcan format but ask her, they will sell you a 
PCB or
> complete prepopulated board. just add a schaeffer or stooge panel 
and you
> are right!
> Also Doepfer is cloning the SOU module (in 2 or 3 separate 
modules) and you
> can convert it to motm (I did that with some doepfer modules).
> Why not begin with a new module not available at other 
manufactures??
> err...., M(otm)ARF????
> 
> ;)
> 
> Josue Arias.
> 
> ----- Original Message ----- 
> From: "coyoteous" <satori@t...>
> To: <motm@yahoogroups.com>
> Sent: Wednesday, June 11, 2003 1:40 AM
> Subject: [motm] Re: 200 Series
> 
> 
> > I like Keith Winstanley's MOTM-style 292:
> >
> > http://home.freeuk.net/bandpass/292.html
> >
> > Add some tick marks and CV jack legends and you're there.
> >
> > Barry
> >
> > --- In motm@yahoogroups.com, "Paul Schreiber" <synth1@a...> 
wrote:
> > > OK, the cat's out of the bag. Yes, I do plan some Buchla-based 
modules.
> > First up: 292 Low Pass
> > > Gate.
> > >
> > > What I want discussion on is the front panel styling. One of 
the
> err..unique
> > aspects of the
> > > Buchla was that *every* module had a different front panel. 
The SIZES
> were
> > uniform multiples, and
> > > in general flow was bottom-to-top-from the side :) Meaning:
> > >
> > > a) Inputs on the bottom
> > > b) CVs on the left side
> > > c) outputs on the top
> > >
> > > Some modules have everything on the top (filter banks, since 
there is no
> > CV).
> > >
> > > So, what are thoughts about this? I want to still use the MOTM 
panels
> sizes.
> > But I can:
> > >
> > > a) change color
> > > b) add graphics
> > > c) change knobs/add colored knobs
> > > d) not be "on grid"
> > > e) place jacks somewhere except across the bottom
> > >
> > > Well??
> > >
> > > Paul S.
> >
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/
> >
> >