MOTM

Cool, thanks for the info!

15 inches deep-wow, that's a lot deeper than I was planning. I was thinking
more like 8". Using the MOTM-300 VCO as a baseline, are there any other
modules that are much 'deeper' than that? I don't want to make a case that's
too shallow and then have a module come out with a foot-long PCB on it.

Unfortunately, space is of the essence in my studio, so I'd like to keep the
cabinets as shallow as possible.


		
		^>^>^>This is exactly what I did, built a 20-space rack out
of some nice-looking
		plywood, with 8 spaces of rails in the back, and mounted the
900 in back.
		My rack is 15" deep, with the rails set in 1" on each side