MOTM

> The stainless stell is tough, but not impenetrable. I've drilled a
> couple dozen so far. You'd only need to drill 2 holes to mount a
> bracket, the rest of the metal that touches the front panel can be
> notched out with tin snips. I've done this too.
> 

You're a lot more patient than I!  That's a lot of metal cutting.

> I agree that pre-drilled holes would be a much better solution. I
> just can't imagine a configuration that wouldn't require custom
> drilling at some point.
> 

Agreed, that's why my proposal split the bracket in two pieces.  As long
as you have two jacks or one pot near the mounting hole locations then
this would give you a solution.

John Loffink
jloffink@... 

The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com/

The Wavemakers Modular and Integrated Synthesizer Web Site
http://www.wavemakers-synth.com/