Thanks to everyone who responded. I think the problem was that I
thought is was going to be easy, so I wasn't careful enough.
At 6:17 PM -0700 4/29/03, MOTM Markk wrote:
were design modifications.
Here a neat trick: patch a sine wave into the CV input of a 700 in
voltage mode, with +5V on one input (or +5V and -5V into each input)
you get square wave and the knob controls pulse width. Use an 800 as
the voltage source and you can play notes without a VCA.
thought is was going to be easy, so I wasn't careful enough.
At 6:17 PM -0700 4/29/03, MOTM Markk wrote:
>this is why I am happy to be "nominated" the SLOWEST solderer...Except for the the pot on the 700, none of these were mistakes, they
>around... so far, so good... no un-soldering has been required...
>(ok ok, let the slam fest begin, I know you are all saying.....
>"but it will.")
were design modifications.
Here a neat trick: patch a sine wave into the CV input of a 700 in
voltage mode, with +5V on one input (or +5V and -5V into each input)
you get square wave and the knob controls pulse width. Use an 800 as
the voltage source and you can play notes without a VCA.