MOTM

no, you are doing it right.  We're supposed to fill in the via holes before the final wash.  What I was referring to was what you do if you are passed that point.  You never want to use the organic if you can't wash it.

 

- chris

 

-----Original Message-----
From: paulhaneberg [mailto:phaneber@...] 
Sent: Wednesday, April 09, 2003 3:32 PM
To: motm@yahoogroups.com
Subject: [motm] Re: vias question

 

I solder all the vias holes with organic, but I do it before the 
final wash.  The organic seems to flow better.  I am very careful to 
not solder the remaining holes which are to get wires etc.

Yeah, I know I'm not following the directions.

As far as the caps, I think its because the leads are very thin and 
fragile and might break off when scrubbing.