MOTM

Hello all,
 There was a little talk about the reasons why certain cable color 
combinations were picked. I'm wondering what kind of systems other 
people came up with in the group.

 I picked one of each cable color in each length. For each set of 
similar length cables I used the same color heatshrink. The 2' cable 
set has one color heatshrink, 3' another color, and so on... I can 
pick out the right cable length from a rat's nest of cables by the 
color of the heatshrink. The different cable colors help me trace
them 
quickly in a patch. The heatshrink helps me verify that I really did 
follow the right cable in a patch.


Unfortunately I had to give up a lot of combinations that I wanted 
with this system. 

 Recently I had a bad experience where I was in a performance 
situation and relied on using cables with 1/4 inch jack on one end
and 
1/8" on the other. I was hampered all night because I'd go to pick up 
a 1/4" to 1/4" or an 1/8" to 1/8" cable and grab a 1/4" to 1/8." By 
the end of the night I decided that I would go back to using only
1/4" 
to 1/4" and 1/8" to 1/8" with 1/4" adapters where needed. This 
inspired me to adopt a standardized cabling system to avoid
confusion. 
Hopefully soon the weather will change so I'll be able to convert all 
my 1/8" modules to 1/4".

Ok... enough talk from me...

So why did you do the things