MOTM

At 5:23 PM -0500 2003/01/25, The Old Crow wrote:

>   Modulate.  Replacing the knob settings would by far too awkward to be
>useful.  Much more intuitive to set a level or rate, then "move it around"
>with a little +/- CV.  The "0 to +V" I mention is an extreme, such as when
>a knob is fully CCW and the full range of the parameter is to be adjusted
>with a CV.

I'm hoping that positive control voltages will increase the rate, 
rather than increase the time. It would be handy to be able to plug a 
key down velocity (or key up velocity) from a MIDI-2-CV interface 
directly into the 880 so that playing softly gives slow attack and 
release times while playing forcefully will give much quicker attack 
and release times. Also, the key voltage can be used to shorten the 
attack/release times as you play progressively higher up the keyboard 
to mimic the same effect on acoustic instruments. I believe this is 
how all my other synths work.