MOTM

This will be a FANTASTIC addition when it's released, I am pumped 
about this one. The panel looks a bit crowded though, mostly from the 
Gate pushbutton and Gate LED. The LED can certainly be moved around, 
as you've indicated. Perhaps the -OUT could be eliminated so that a 
larger 0.5" pushbutton can be used (like the one Moe mentions on his 
website). I use this same 0.5" pushbutton on my Darkstar and OMS-820 
modules and I really like it. The -OUT is convenient, but can easily 
be generated by a MultiMix or MOTM-830. Just my $0.02.

BTW, is your Pulse Width Multiplier module still under consideration 
as an official MOTM product? I'm still looking forward to that one, 
but I seemed to be the only one who was salivating over it.

At 5:02 PM -0500 2003/01/24, The Old Crow wrote:
>   I am back from NAMM, and can elaborate.  The CS-80 filter EG and the
>MOTM-880 are a bit different, so I will describe both:
>...
>
>   I am building three prototypes, and things like the LED colors are under
>PIC control, so if they need tweaked later, it is no problem.