MOTM

I tried this for awhile.  I had a 20U high slanted cabinet sitting on a
table top. It worked okay, but ideally for easier patching you want
something that's longer in the horizontal direction than the vertical
direction.  A couple of side by side rack cabinets would be a better
fit.  I ended up building my own cabinet instead.

John Loffink
jloffink@... 

> 
> I've ordered my MOTM rack rails, and I'm in the process of attempting
to
> figure out what I want in terms of a cabinet for all of my MOTM gear.
I've
> checked out custom cabinetry on the Synthtech web site, and got some
good
> ideas there.
> 
> I've also heard from other modular owners that some racks look like a
good
> idea, but aren't, such as those that are typically above or beside a
> mixing console.
> 
> For those of you who have spent hours upon hours in front of your
modular
> gear, what is the most "comfortable" (or less fatiguing on the back)
> position to have your equipment in? I'm leaning toward a floor
> mounted/slightly slanted rack that is at chair level so I won't be
bending
> over, standing up, or leaning over equipment to get at the modular
gear.
> 
> Any advice would be greatly appreciated.
> 
> -->Neil
> 
>
------------------------------------------------------------------------
--