MOTM

The link for the switch specs is
http://us.switchzone.com/pdf/JFnonilluminated.pdf for any who do not want to
search thru.  It looks like you can actually print onto these.  Is that the
plan?  (hope not, it just rubs off)

George
----- Original Message -----
From: Paul Schreiber <synth1@...>
To: <motm@yahoogroups.com>
Sent: Thursday, October 17, 2002 9:27 PM
Subject: [motm] Blue switches/Jacks


> The switches are NKK part numer JF15SP3G. see www.nkkswitches.com
>
> They are cute sexy and cost WAY TOO MUCH. But they really are nicer than
the ITT "standard"
> switch like on the OB-8, etc. and only about 40 cents more (I think the
switch should COST 40
> cents....grumble).
>
> I'm going to use the same jacks as on the Expressionist. This way, there
is a pcb per 'row' and
> small 10-pin ribbon cables attach to each from the "main board". The "main
board" itself has the
> LCD pc board and the switch/LED board on "risers". This attaches via blind
PEM threaded spacers
> (like on the MOTM-900, that holds the connector pcb). There are 7 seperate
pc boards in this
> bugger. But it all plugs together sort of like Lego.
>
> Paul S.
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>