MOTM

> ----- Original Message -----
> From: jwbarlow@...
> What is this "conductive mesh" that you mention?

It is a very fine weeve of copper wire.  That is the best way I know to
describe it.  It is very thin and flexible, like wide Christmas ribbon.  It
has adhesive on one side.  Apparently a surplus product once used by NASA.

> I'd like to see this.

I am in central Indiana, just north of Indianapolis about 15
 miles. :)  Come on over and take a look.... <g>
Or, you can look at the photo I just uploaded:
http://www.wiseguysynth.com/larry/misc/mesh.jpg
misc-mesh. <nyck nyck>

> What is the maximum length of the mesh?

I got it in 25 foot rolls, 1" wide.  I got enough to make a sh*t load of 2
or 3 foot ribbons.

> How are you making the resistive element?

I was thinking about nichrome wire.  The cool thing about that is you could
have 2 or 3 wires in parallel so you could get more than one CV from the
ribbon.  I have several different protos drawn up with a switchable point in
the middle so you could have a split point that could be switched on or off.
The configurations are endless.  But, it has to be simple for me to make it
work.  No uP.  No start point when you first touch it. No assignable split
points.  Get the KW MIDI ribbon thing for all that BS.  But, it could have
all the cool features you could implement in the analog world.  Gate OUT of
course. Maybe the 2nd or 3rd wire could be used to trigger another CV on
which could be used like an aftertouch or an actual trigger since the actual
gate will stay high as long as the ribbon is depressed. Since the ribbon is
1" wide you could slide along the lower half for CV and maybe hit
re-triggers with your other finger at the top as you move along.

> I remember Moe giving us (me) a rather good
> description of the mechanics of his old Moog ribbon.
> As I recall, the > ribbon was suspended above
> the resistive strip by a spring mechanism.

Yes, that is really the hard part. My latest idea is to use thin foam (like
you see used to wrap things for protection).The nichrome wire would sit in
slots in the foam and the mesh is adhesive on top of that.  Now, look at me
giving away all my secrets.

The electronics would be the easy part.  However, some challenges are there
because even fine Nichrome wire may only have 50-100 ohms in a 3 foot piece.

My basic thought was this, a nice walnut wood base about 3 inches wide and 2
to 3 foot long.  Most if not all the controls for range, split, reversing,
etc, would be in a module that the ribbon would plug into.  Putting the
controls are the ribbon end means you have a lot larger connecting cable.

> Glad you're still thinking of it!

Yes, it is on the "to do" list.  However, Stooge panels, flat rails, end
caps, and a variety of other things have kept me from getting to much of the
"to-do" list.  I plan to change that after I get my cabinets built and my
synth module building caught up.  Doing the Blacet Miniwave and Time Machine
conversions and the complete documentation of that process took a lot of
time and put me behind.  Plus I have been scanning lots of documentation and
writing disk drive replacement instructions for my beloved Korg DSS-1 and
DSM-1 sampling synths.  And, soon it will be Harley riding weather.  We got
heavy snow here today.  I hate winter.  And, I still have not finished the
docs for the breath contoller mod for the MOTM-850.  And there is the
"Mother of All Joystick Interfaces" for Paul calling my name... sigh....

Larry
Insert standard disclaimer