MOTM

The Blacet Miniwave to MOTM conversion instructions have been revised to
"Revision 1" dated 01/17/2002.  Mostly, I corrected some stupid typos I
missed originally.  However, one significant error was found as I called out
R20 as a 20K resistor and it is really a 1K resistor.  Thanks to Scott
Juskiw for catching this mistake.

I ordered my second Miniwave module when I ordered by extra EPROM from John.
If you don't have a Miniwave, I highly recommend you get one.  Awesome !

I have completed my Time Machine and it works beautifully.  I am about 75%
done with the instructions.  I have one or two other "modification" issues I
have mailed John about.  I may add one more diode and change another
resistor or two.  Like the Miniwave, there will be a very detailed set of
instructions with photos.  However, I plan to include all the modifications
in these instructions to keep everything in one place.  Changes are more
significant than the Miniwave.  I will mark the modification in the
instructions in case you elect not to make the changes.  But, you will want
to I think. :)

Next on the list is getting caught up on drilling end caps and back to that
SKB pop-up case back cover.  I need to get that finished.  I wish I was at
NAMM. :)

Stooge Larry