MOTM

I also sometimes add the MIX OUT to the board mix but with no wet 
signal at all.  By increasing or decreasing the amount of dry, you 
can get better control of the overall sound.  This is great for 
phaser-like effects.

Don't forget to play with the LFO switch.  I almost always use the 
DUAL REV mode since it produces complexity, but the other modes work 
weel with some voices, too.

Mike

--- In motm@y..., mark@i... wrote:
> ...
> The three separate outputs can be mixed at the board to create 
stereo
> effects. This capability can be increased by sending these outputs 
through
> phase inverters or short delays, or by modulating the RATE control 
with
> another LFO, such as the 320.
> ...