Thank
you Paul and Moe!
I'm
off work today and decided this would be my day to do MOTM and MOTM related
stuff! (Wife's at work, kids are in school and I have the house to
myself)
Just
did the jumper from U6 pin 1 - pin 5 on my Miniwave, Thank you for your
help!
I did
the resister change in my 420!
Finishes soldering the boards for my LH822 and LH831
(going to fire up the drill press and do the front panels
next)
Fininshed my multiple (simple 1 in 3 out's no fancy
cascade's!!!)
And to
top it off I finished my 2nd cabinet!!!
Looks
like I'm all caught up just in time for the pedal
interface!!!
Tx
Al
-----Original Message-----
From: Paul Schreiber [mailto:synth1@airmail.net]
Sent: Wednesday, October 17, 2001 11:06 AM
To: motm@yahoogroups.com; Aardvark-mi
Subject: Re: [motm] Silly IC pin question
They count counter-clockwise, from pin 1. In 99.999%, pin 1 is the top, left corner.The exception in the PLCC package, where pin 1 in the in middle of the top row (the package is a square).The thing to remember is to count counter-clockwise.So, for a 8-pin part, pin 1 is "across" from pin 8.Paul S.----- Original Message -----From: Aardvark-miSent: Wednesday, October 17, 2001 9:41 AMSubject: [motm] Silly IC pin questionOk, here's an IC question from a never touched an IC before MOTM non-EE type!If pin 1 on an IC is the one with the dot than what are the other pins?Do they go1-3-5-7 on one side and2-4-6-8 on the otheror1-2-3-45-6-7-8;or1-2-3-48-7-6-5orIs it a secret that you could tell me but you'd have to kill me!!!TxAl Wagner
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.