MOTM

>From: "Paul Schreiber" <synth1@...>
>
>OK OK I give in.
>
>Everyone sit tight for a week. Let me contact John about a collaboration.


I managed to mount two Dark Stars side by side in a single MOTM size panel.
I used .100 Acrylite (plexi) so the theaded pots work fine for mounting. My
only complaint is that I cant find Alco style knobs small enough to
accomodate the pot spacing. I tried the Rat Shack brand but they are still
just a tad too wide - perhaps there is a .50  Alco without a skirt. The RS
knobs were useful on my Paia gear though...

I recently completed a Blacet Frequency Divider with most of the divisions
brought out to the panel.
To mount the 16 jacks & the PCB on one 2U panel,I tilted the board so the
knobs are oriented diagonally across the panel - no photos yet.... but it
looks like this:

      0
     0
    0        <- Knobs
   0
  0

 0 0 0 0 
 0 0 0 0   <-  Jacks
 0 0 0 0 
 0 0 0 0 

I still have the same problem with the pot spacing though...

I'm interested to see what Paul & John can work out.

jmw