MOTM

OK - first, say that 12 times fast... --Out loud.

I was just playing around w/ a simple 5 Step atonal sequence 
generated by a Encore UEG.  

UEG into 820 Lag into the FM1 input of a 300 VCO and out.

Anyway, what's interesting about this patch is the modifying of the 
LAG Up, Down, and LIN/LOG controls.  What is really cool is that you 
can even change the UP/DOWN LIN/LOG controls in the first place but 
what would be extremely cool is if you could control the LIN/LOG 
settings of the UP/DOWN legs independently so, for example, you could 
run a square wave through it and get a triangle with a Linear Up leg 
and a LOG Down leg - or vice-versa.

Tony - Just wondering, is this one of the intended set of controls on 
the 820 Companion module?

Thanks,

JP

By the way, look at the synergy of an open system - Encore, MOTM, 
Oakley.  Just run it through a Blacet Time Machine, and the dry OSC 
and delay output through a DIY mixer and you're golden.  One of the 
big pluses of a standard platform and a big reason why I chose MOTM.