MOTM

----- Original Message ----- 
From: <mark@...>
I just looked at my 800.  If the bottom pot 
and knob were removed, and the same PCB
were used, a fifth jack would fit easily.

--LH--
Yes, and no.  I agree, with the bottom pot knob eliminated
you could add a 5th jack and still use standard MOTM-800
hardware and PCB size IF you are careful with the height of 
components in that area.  You could have interference if you
do not plan well.  Certainly, 6 jacks on the bottom requires
not only a notch in the PCB, but also a change in the mounting
bracket (like my 831).  I think that is probably obvious to
everyone though.  :)

Larry H