MOTM

so for these flat rails, are you guys going to mark your modules 
mounting hole patterns on the wood, and then drill/rout out the wood 
from behind the rails where the screws will be sticking through the 
rail, or will we (hopefully) be able to get along with shorty 1/4 
inch long mounting screws, with maybe a washer behind each of the 
countersunk holes as a spacer??
  And Larry, I am assuming that when you mount your modules to the 
rails, the tops of the modules are flush with the rail, right?
Just a few case layout questions!!

I pictured them as having an "L" cross section..  I Guess they 
wouldn't be "flat? rails then, eh?

larry, the time and effort you and your wife are going through for 
the MOTM community by screwing in 6000 screws is crazy!!!  Holy cow! 
thank you!!!!  
and your 822/83? modules too!  yikes!

and then of course theres Paul and his small crew of uber-designers 
too....   we nag and ask questions and blah blah, but really, 
THANK YOU!!!!!

~Steve M..