MOTM

Moe wrote:
> 1. A 1U panel with power switch and fuseholder, and 2 output jacks
> for buffered +15v and -15v.

Would this be used for power distribution to multiple cabinets?  My target
system is three cabinets, so I'm in the process of designing a power system
to support it.  I plan on replacing the 900 with a +-15V 3A PowerOne.  Also,
future modules may require +5V so I'm including a separate PowerOne for that
as well.  Part of my concern is insuring that the star distribution system
is maintained, for obvious reasons.  I'm not sure if a single 1U panel would
handle all of the necessary functionality for multiple cabinets.  I've
picked up 1U and 2U blanks to play around with specifically for this
purpose.  I would definitely go for stooge power panels over my own designs
provided they supported multi-cabinet properly.

Moe wrote:
> 2. A MOTM-120A panel. The MOTM-120A would be laid out just like a
> 120, but would have 4 extra jacks in the top row position. These
> would support a mod bringing out all 4 sub octaves to their own
> buffered full amplitude outputs. The mod would mount on a
> daughterboard like the MOTM-800 output LED mod at my site.
>
> Yes? No? Maybe?

Yes!

Cheers,
George