MOTM

Small 1" wood blocks glued/screwed into corners with Velcro or screw inserts?
 Terry

Microtonal wrote:

> I just built myself a cabinet for my MOTM system.  Does anyone know a good
> way to non-permanently fasten a panel to the rear?  It's usually easier to
> get to power connectors from the back and I don't want to paint myself into
> a corner by nailing that panel down.  The cabinet is made of 3/4" birch
> plywood and too soft to use screws more than a few cycles.  The back panel
> is 1/4" birch plywood.  I couldn't find any latches at the hardware store
> that seemed like they would work.  Any suggestions?
>
> John Loffink
> microtonal@...