MOTM

Hi group,

Using a single width panel for the AC switch/fuse/lamp and burying 
the actual power supply away in the case/rack is a good idea. I've 
done it in my new MOTM system. Some things to be aware of:

-run the AC lines well away from audio and PSU lines. Try to cross 
the two at right angles if you have to.

-use the correct fuse! A power supply module capable of supplying 
1.5A @ 15VDC shouldn't draw more than 1 amp. A 2 amp slo-blo fuse in 
series on the live(!!!not nuetral!!!) should be fine.

-keep the wiring neat and secure. Use heatshrink on switch/fuse 
terminals!! Remember, you're gonna be poking around in there with 
your hands.

-if you don't know how to wire hi-voltage/current circuits then get 
the 900 PSU.

I've lost a co-worker and friend to electricity and see much badly 
wired gear in my daily job as an audio tech. It gives me shivers. 
Please be careful so as to twiddle knobs til a ripe old age. Feel 
free to Email me personally with questions or problems.

Cheers,

Richard.