MOTM

Mark, I have a couple of suggestions.  Certainly if you do not mind it being
largish, the Neutrik Speak-on twist lock connectors are good.  They are
available in 2 and 4 conductor versions.  In a smaller foot print, I like
the connectors that were used for many years as the standard connector for
CB microphones.  They are 4 conductors, notched to only insert one way, are
chrome metal on the outside, and have a locking ring that tightens on the
outside so that they will not fall out.  Panel wise, they take up a little
less space than XLR.  Sorry I cannot think of the right name for them But,
if you go to RAT SHACK and ask for a CB microphone connector, they probably
carry them.  The females goes on the cable and the male is panel mount with
recessed pins.  I'll try to look one up in a catalog later.

Larry Hendry


----- Original Message -----
From: <mark@...>
To: <motm@yahoogroups.com>
Sent: Saturday, March 31, 2001 12:17 PM
Subject: [motm] chassis mount MTA-1564??



Is there such a thing as a chassis mount MTA1564, or does anyone have a
suggestion for a four conductor chassis mount connector that takes 18 gauge
wire that fits into a round hole??







Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/