MOTM

Off the top of my head...     (Ha!)

MOTM-101 Noise/S&H - 2U ($139/$169) - Not until the stock of soon-to-be-rare
MOTM-100s is exhausted.

MOTM-130 Dual Pan/Fade VCA - 2U ($199/$269)  Yeah!

MOTM-830 Dual Mode Mixer - 2U ($169/$229) - Very soon!  Yeah!

MOTM-310 MicroVCO - 1U Is still on the radar, but not close.

?? Super EG - This has been talked about in the past, but Paul has never
publicly decided on a design. (MOTM-810???)

MOTM-840 Envelope Follower - This is a 2U wide Envelope follower with both
average and true RMS detectors
(for patching up a MOTM compressor!), GATE and TRIG generation. Not all bugs
worked out,
but will have many 'pro' features to get the most out of (amplified) guitar
inputs.

The Triple Pre-Amp was originally called the '130, but that has changed.
The new designation has not be released that I know of.

--Shemp


> Delayed Vibrato - 1U special purpose module with built in sinusoid
> LFO, which is damped for natural delayed amplitude buildup. Yes, you
> could reproduce it rather closely with 3 other modules. It will be a
> boon to small system owners.
>
> Triple Preamp - 1U, 2 line level inputs (for a stereo synth, for
> instance), 1 guitar level input. No mic inputs. I don't agree that
> this module is not needed. I don't have mics and mic preamps laying
> around. Most preamps are not optimized to amplify to the 10V p-p
> levels MOTM uses. If you do have something that does the job already,
> then you don't need this module.
>
> Envelope Follower - 2U, I don't remember the announced features.
> Search the archives for details.
>
> SEM filter - Paul promises it will have all the dc offset leakage and
> otherwise crappy specs of the original. Rumored to have a cool extra,
> maybe voltage controlled mode (HP, BP, LP, Notch).
>
> Moe