MOTM

Well, turned out that one of my solder joints was a little light on 
the solder.  MOTM-300 seems to be mostly working, but now some 
questions for those of you who have built them.

I have not yet started the alignment steps, but by default the VCO 
does not output a waveform in that audible range until coarse setting 
around 4 for the one I have. 

Is this correct? Is this something that will be taken care of in 
alignment if not?  Or do I need to keep looking for problems on my 
board.

Thanks for all who gave me tips.

Bruce