MOTM

I've used pine for a wing that is 26u and it seems to be fine.  Also have
used it to build a odd case for Blacet stuff.  It's 3/4 inch thick.  The
only thing I don't like about it is that it is very soft wood.  These were
my preliminary cases till I'm able to spend some real time on building a
case nice case.  Then it will probably be 3/4 inch hard maple.  Next I'm
planning on taking my Serge out of the SKB and mounting it in a Oak plywood
case.  I guess building the cases are have the fun?  
NAAAA!
Patiently awaiting my 101 and my 2 300!  (Which will make a total of 5 osc
going)  Kinda goes with the territory of living in OcOnOmOwOc Wisconsin.  I
guess it's just a must to have 5 O's
Joe Bruno


-----Original Message-----
From: Andrew [mailto:ixqy@...]
Sent: Wednesday, February 21, 2001 11:04 AM
To: motm@yahoogroups.com
Subject: [motm] Speaking of Wood Cabs...



 Can anyone suggest a type of wood to use for my cabinet? It's 
getting aroung the time that I need to build this thing so I'll be 
looking for the supplies that I need before too long.

 I seem to remember someone mentioning that a wood that is too dense 
(?) has a tendency to warp. That scares me! I'd hate to invest all 
the effort to build the cabinet only to find that it warps a year 
later.

 Times like this make me wish I would have snuck out of my high 
school electronics shop class and into woodshop class a few 
times...  : )

 Patiently waiting on a 101 and 440 (yay!)
 Andrew Sanchez



 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/