MOTM

I have been gone for a few days.  If you haven't already sent it to the
list, would you mind doing so.  I am sure a lot of people would appreciate
it.

Cheers!
Shemp

> -----Original Message-----
> From: J. Larry Hendry [mailto:jlarryh@...]
> Sent: Saturday, February 10, 2001 11:35 AM
> To: motm@yahoogroups.com
> Subject: Re: [motm] DIY Pitch to Voltage Converter
>
>
> ----- Original Message -----
> From: Tentochi <tentochi@...>
> Paul hasn't been to keen on doing a Pitch to Voltage Converter from what I
> can remember.
>
> Here is one to check out.
> http://www.geocities.com/efm_gc/index.html
>
> Click on PV1 (PCB = $14)
> --Shemp
>
> ----------
> This is the Harry Bissell P-to-CV I wrote the list about earlier.  I have
> the PCB and it is on my project list.  But, I am having trouble
> finding the
> MAT transistor pair.  I went to the analog devices website and it wasn't
> working well.  anyone know what's going on with that?
>
> I have a parts list for this thing too (with Mouser #s).  And,
> there are two
> different version of the schematic. The original PCB was designed to go in
> an Etherwave where you would have 3 outputs.  1 = CV based on osc pitch
> (right ant)  CV based on volume ant (left). and a Gate based on
> moving your
> hand in and out of the volume antenna range.
>
> I think Harry told me that the gate worked best if the Etherwave volume
> function was tuned to work in the non-tradition mode of closer = louder.
>
> If you are thinking about this as a stand alone project (as am
> I), then the
> schematic is altered as a few parts left off to forgo this gate
> function.  I
> have a copy of this altered schematic direct from Harry if anyone wants a
> copy.  I also plan to see the wild man in March.  Apparently, he has this
> thing working in conjunction with some kind of quantizer that I
> have to put
> my eyes and hands on to try and understand.  That's one more
> reason for you
> to be sure and make the AHMW thing this year Shemp.
>
> Larry H
>
>
>
>
>
>
>