MOTM

Actually, I think the spaces as I understand what Norman describes look
pretty clear in the back.  I would have chosen the spots directly under the
pots (in line), but those just won't work at all.  But, if they were put
just outside the box to the right of the LEDs, I think they would clear OK.
They you could add a white line down and over from the bottom of the pot
scale.
Just my $.02
Larry

----- Original Message -----
From: <mate_stubb@...>
To: <motm@yahoogroups.com>
Sent: Saturday, February 10, 2001 12:35 PM
Subject: [motm] Re: suggested mod for motm700 (longish)


--- In motm@y..., norman fay <NFAY@F...> wrote:
> BTW, I figure a good place for the sockets would be if you were to
> draw an imaginary line up from the third column of sockets on the
> existing module, and intersect it with a line drawn from the two
> rows of LEDs.

Glancing at mine, I don't think you'll totally clear the pcb at that
location - there are tall electrolytic caps that infringe into at
least one of those locations.

Moe