Yahoo Groups archive

Milter-greylist

Index last updated: 2026-04-28 23:32 UTC

Thread

Questions about opportunities of synchronization.

Questions about opportunities of synchronization.

2005-10-26 by Ogogon !!!

Questions about opportunities of synchronization.

1. Whether it is possible to transfer by means of synchronization to the 
synchronized systems static parameters from greylist.conf, for example 
"acl"?
2. Whether transfers started milter-greylist to the partners on 
synchronization contents greylist.db?
3. Whether allows to correct the mechanism of synchronization a 
situation when one of partners some time was inaccessible, or was 
restarted, or has lost contents of the base?

Ogogon.

Re: [milter-greylist] Questions about opportunities of synchronization.

2005-10-27 by Emmanuel Dreyfus

On Thu, Oct 27, 2005 at 03:05:49AM +0400, Ogogon !!! wrote:
> Questions about opportunities of synchronization.
> 1. Whether it is possible to transfer by means of synchronization to the 
> synchronized systems static parameters from greylist.conf, for example 
> "acl"?

What's wrong with
for m in mx1 mx2 mx3 ; do scp greylist.conf $m:/etc/mail ; done

I wouldn't be opposed to a built-in sync system, but I won't work on that.

> 2. Whether transfers started milter-greylist to the partners on 
> synchronization contents greylist.db?

I'm not sure I understood that question.

> 3. Whether allows to correct the mechanism of synchronization a 
> situation when one of partners some time was inaccessible, or was 
> restarted, or has lost contents of the base?

Right now the database get out of sync, which results in mail being
greylisted a bit longer. That's not very satisfying, but it's not
supposed to occur everyday.

I recall someone worked on a full sync command, but the thing has not been
finished (Or I missed the patch and the person did not complain that it
has not been integrated).
-- 
Emmanuel Dreyfus
manu@...

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.