Milter-greylist

On Sun, Oct 30, 2016 at 02:14:21AM +0200, manu@... [milter-greylist] wrote:
> Fred Smith fredex@... [milter-greylist]
> <milter-greylist@yahoogroups.com> wrote:
> 
> > Thanks, I've found it, and (of course ;) have another question:
> > can you advise me on which option is the right one for this situation?
> > 
> > Note the separator between each timeout 
> > field is a ';'. The default values (if not set) are:
> > T=C:5m;S:10s;R:10s;E:5m
> > where s is seconds and m is minutes.
> > 
> > My guess would be R ???
> 
> Yes, IIRC this is R for RCPT stage.
> 
> > which, I suspect, would require the specificaton:
> > Xfilter1, S=inet:port@localhost, F=T, T=R:20s
> > Also, can I pick any old (unused) port?
> 
> This is for the communication between sendmail and milter-greylist.
> If it happens on the same machine, local Unix sockets are preferable, 
> because they cannot be used at all from the network.

thanks.

One more thing on which I'm not entirely clear: I assume (since the
doc doesn't seem to be specific on this) that this is a separate
communication channel, NOT the same as defined in /etc/mail/greylist.conf:

	socket "/run/milter-greylist/milter-greylist.sock"

which also serves for milter-greylist <--> sendmail communication??


-- 
---- Fred Smith -- fredex@... -----------------------------
                    The Lord detests the way of the wicked 
                  but he loves those who pursue righteousness.
----------------------------- Proverbs 15:9 (niv) -----------------------------