Milter-greylist

I downloaded and compiled p0f ( p0f-3.03b.tgz) on SLES 10 SP4 64-bit.  I have p0f running in daemon mode and I used milter-greylist (4.2.7) to talk to the p0f socket but p0f is terminating.  I changed the command to send the output to p0f.error. 
 
Current Command Line
./p0f -i eth0 -o /var/log/p0f.log -s /var/run/p0frun.sock -u p0f-user 2>>/var/log/p0f.error
 
milter-greylist config:
 
p0fsock "/var/run/p0frun.sock"

# safe Windows hosts
racl whitelist p0f "Windows 2003"       addheader "X-Greylist-OS: %Fx"
racl whitelist p0f "Windows 2008"       addheader "X-Greylist-OS: %Fx"
racl whitelist p0f "Windows 2000 SP4"   addheader "X-Greylist-OS: %Fx"
 
# unsafe Windows hosts -- put this line below ALL racl whitelist lines
racl greylist  p0f "Windows" \
               delay 20m autowhite 4d   addheader "X-Greylist-OS: %Fx"

 

p0f.error log file:
 
[!] WARNING: Query with bad magic (0xdefaced).
[-] SYSTEM ERROR : read() on API socket fails despite POLLIN.
        Location : live_event_loop(), p0f.c:905
      OS message : Connection reset by peer

I e-mailed the developer of p0f and he sent me this.
 
>>> Michal Zalewski <lcamtuf@...> 2/14/2012 11:33 AM >>>
Hey,

You should talk to the maintainers of milter-greylist (milter-greylist@yahoogroups.com?). P0f 3 doesn't support old-style output and this is unlikely to change, so they should probably update their code.

/mz

As a result, I joined the list to ask if this is a know issue and if it will be fixed.
 
Thanks,
 
Gary Faith