Lpc2000

If you create a linker script that would link the RTOS in the first 
flash sector(s) and start the task on a flash sector boundary this may 
be possible. It requires you to know how the linker works and what parts 
of the libraries are being used by your rtos and/or your tasks.

I think the amount of time it costs to get this working will be far more 
than the time you will save programming the microcontroller. Also it 
will not be possible to stop a task, erase and program it via IAP and 
restart the task unless you move a lot of code to sram.

Why do you want to do this?

Regards,
Richard.


a_storic wrote:
> Is it possible to program the LPC2129 micro for RTOS operation and
> then reprogram a task within the micro RTOS for a new function.
>
> IE program the micro to be a particular function type (set the input
> and output pins, comms Ethernet, CAN, the number of task(program
> parameters for how the input and output will function) and then
> with the IAP program task with the program.
>
> having allocated task at particular memory location within the micro
> then by writing a small code compiled to then be loaded into the micro
> as a defined task within the existing micro program.
>
> ANdrew