Lpc2000

----- Original Message ----- 
From: "Leon Heller" <leon_heller@...>
To: <lpc2000@yahoogroups.com>
Sent: Saturday, February 21, 2004 9:22 AM
Subject: Re: Re: [lpc2000] LPC2106 Programming - ISP and hex file


>
> ----- Original Message ----- 
> From: "gokbektas" <gokbektas@...>
> To: <lpc2000@yahoogroups.com>
> Sent: Saturday, February 21, 2004 8:30 AM
> Subject: Ynt: Re: [lpc2000] LPC2106 Programming - ISP and hex file
>
>
> > Now I can program the chip,
> > I compile LED example of crossworks and make hex file like you said.
> > I see different voltages at the pins of LPC. 2.57V, 3V, 3.V  etc
> > I also tried UART example for 210x of Crossworks, it seem it does not
> > send bytes to PC.
> >
> > I suppose I can program the chip (I can do it only 19200baud in ISP,
9600
> did not work)
> > with ISP (no error messages appear) but I can not make it work.
> > After programming, I push the reset button and remove bootloader jumper
to
> make it work...
>
> I just tried the UART example, loading it via both the JTAG and Philips
ISP
> utility. Both worked OK. What terminal emulator are you using? Are you
> getting any output at all (garbage)?

Did you remove the jumper which enables the bootloader? You need to disable
the bootloader and reset to run the program. I sometimes forget to do that
and wonder why the program doesn't work. 8-)

Leon