Lpc2000

----- Original Message ----- 
From: "gokbektas" <gokbektas@...>
To: <lpc2000@yahoogroups.com>
Sent: Saturday, February 21, 2004 8:30 AM
Subject: Ynt: Re: [lpc2000] LPC2106 Programming - ISP and hex file


> Now I can program the chip,
> I compile LED example of crossworks and make hex file like you said.
> I see different voltages at the pins of LPC. 2.57V, 3V, 3.V  etc
> I also tried UART example for 210x of Crossworks, it seem it does not
> send bytes to PC.
>
> I suppose I can program the chip (I can do it only 19200baud in ISP, 9600
did not work)
> with ISP (no error messages appear) but I can not make it work.
> After programming, I push the reset button and remove bootloader jumper to
make it work...

I just tried the UART example, loading it via both the JTAG and Philips ISP
utility. Both worked OK. What terminal emulator are you using? Are you
getting any output at all (garbage)?

Leon