Yahoo Groups archive
Thread
2011-10-21 by Gary
Can soomeone please give me some advice on loading data from tape recorder to keyboard. encountering error many times - adjusted volume a thousand times,tried high and low switch at back of korg. Any tips? Thanks for letting me join this prestigous group of korg poly 800 owners. Gary
2011-10-21 by Martin Ator
Are you actually using a tape recorder? You will need to use the tape out socket. Playing it out through a headphone socket or line out will not be strong enough probably. Change Resistor R96 inside the Poly-800 to 4.7K. It will take some finding on the schematic. Then you can play from a computer or most modern playback methods then. Martin ________________________________
From: Gary <chunkybeefpies@...> To: korgpolyex@yahoogroups.com Sent: Friday, 21 October 2011, 13:48 Subject: [korgpolyex] loading data onto keyboard Can soomeone please give me some advice on loading data from tape recorder to keyboard. encountering error many times - adjusted volume a thousand times,tried high and low switch at back of korg. Any tips? Thanks for letting me join this prestigous group of korg poly 800 owners. Gary
2011-10-21 by Michael Hawkins
I've always used my computer line out and didn't have to change R96 either. ________________________________
From: Martin Ator <cyllall@...> To: "korgpolyex@yahoogroups.com" <korgpolyex@yahoogroups.com> Sent: Friday, October 21, 2011 9:41 AM Subject: Re: [korgpolyex] loading data onto keyboard Are you actually using a tape recorder? You will need to use the tape out socket. Playing it out through a headphone socket or line out will not be strong enough probably. Change Resistor R96 inside the Poly-800 to 4.7K. It will take some finding on the schematic. Then you can play from a computer or most modern playback methods then. Martin ________________________________ From: Gary <chunkybeefpies@...> To: korgpolyex@yahoogroups.com Sent: Friday, 21 October 2011, 13:48 Subject: [korgpolyex] loading data onto keyboard Can soomeone please give me some advice on loading data from tape recorder to keyboard. encountering error many times - adjusted volume a thousand times,tried high and low switch at back of korg. Any tips? Thanks for letting me join this prestigous group of korg poly 800 owners. Gary
2011-10-21 by Martin Ator
Yeah, silly me. R96 is the tape out from the Korg. It will give a stronger signal when you want to save your patches to tape. ________________________________
From: Michael Hawkins <korgpolyex800@...> To: "korgpolyex@yahoogroups.com" <korgpolyex@yahoogroups.com> Sent: Friday, 21 October 2011, 17:23 Subject: Re: [korgpolyex] loading data onto keyboard I've always used my computer line out and didn't have to change R96 either. ________________________________ From: Martin Ator <cyllall@...> To: "korgpolyex@yahoogroups.com" <korgpolyex@yahoogroups.com> Sent: Friday, October 21, 2011 9:41 AM Subject: Re: [korgpolyex] loading data onto keyboard Are you actually using a tape recorder? You will need to use the tape out socket. Playing it out through a headphone socket or line out will not be strong enough probably. Change Resistor R96 inside the Poly-800 to 4.7K. It will take some finding on the schematic. Then you can play from a computer or most modern playback methods then. Martin ________________________________ From: Gary <chunkybeefpies@...> To: korgpolyex@yahoogroups.com Sent: Friday, 21 October 2011, 13:48 Subject: [korgpolyex] loading data onto keyboard Can soomeone please give me some advice on loading data from tape recorder to keyboard. encountering error many times - adjusted volume a thousand times,tried high and low switch at back of korg. Any tips? Thanks for letting me join this prestigous group of korg poly 800 owners. Gary
2011-10-21 by Gary
Yeah using a tape recorder with buttonup and down volume control. Had a "good" for the first two dumps. Then just couldnt load factory "preload" Very frustrating! --- In korgpolyex@yahoogroups.com, Martin Ator <cyllall@...> wrote:
> > Are you actually using a tape recorder? You will need to use the tape out socket. Playing it out through a headphone socket or line out will not be strong enough probably. > > Change Resistor R96 inside the Poly-800 to 4.7K. It will take some finding on the schematic. Then you can play from a computer or most modern playback methods then. > > > > Martin > > > > > ________________________________ > From: Gary <chunkybeefpies@...> > To: korgpolyex@yahoogroups.com > Sent: Friday, 21 October 2011, 13:48 > Subject: [korgpolyex] loading data onto keyboard > > > Â > Can soomeone please give me some advice on loading data from tape recorder to keyboard. encountering error many times - adjusted volume a thousand times,tried high and low switch at back of korg. Any tips? Thanks for letting me join this prestigous group of korg poly 800 owners. > > Gary >
2011-10-22 by Michael Hawkins
you might want to try using a PC and grab the audio recording of the factory defaults from the files section here. ________________________________ From: Gary <chunkybeefpies@...> To: korgpolyex@yahoogroups.com Sent: Friday, October 21, 2011 7:25 PM Subject: [korgpolyex] Re: loading data onto keyboard Yeah using a tape recorder with buttonup and down volume control. Had a "good" for the first two dumps. Then just couldnt load factory "preload" Very frustrating! --- In korgpolyex@yahoogroups.com, Martin Ator <cyllall@...> wrote:
> > Are you actually using a tape recorder? You will need to use the tape out socket. Playing it out through a headphone socket or line out will not be strong enough probably. > > Change Resistor R96 inside the Poly-800 to 4.7K. It will take some finding on the schematic. Then you can play from a computer or most modern playback methods then. > > > > Martin > > > > > ________________________________ > From: Gary <chunkybeefpies@...> > To: korgpolyex@yahoogroups.com > Sent: Friday, 21 October 2011, 13:48 > Subject: [korgpolyex] loading data onto keyboard > > > Â > Can soomeone please give me some advice on loading data from tape recorder to keyboard. encountering error many times - adjusted volume a thousand times,tried high and low switch at back of korg. Any tips? Thanks for letting me join this prestigous group of korg poly 800 owners. > > Gary >