Re: [korgpolyex] Re: Maudio midi controller problems..
2013-08-02 by Michael Hawkins
OK, so I checked my code. Here are my comments in the assembler code for receiving NRPN: ; NRPN MSB followed by NRPN LSB then data value. No other sequence or
Messages
Browse messages
Page 30 of 141 · 7050 messages matched
Re: [korgpolyex] Re: Maudio midi controller problems..
2013-08-01 by Michael Hawkins
I ll have to check it out later today. But glancing at it, looks like it should work. Although, it is more common to see NRPN and RPN s to be sent in groups of
Re: Maudio midi controller problems..
2013-08-01 by bimmerfan222
I managed to fix the jittery output. The 8th pot was defective, causing the MC s analog input to float without a steady reference I guess. Anyway, that one
Re: Successful EX-800 Battery Replacement
2013-07-31 by moses_ybrs
That s a dead link for me Mike, but that s a good article :D I ll be trying that one real soon. Jason:
Re: [korgpolyex] Maudio midi controller problems..
2013-07-31 by Michael Hawkins
Check for a midi loop. Send the text of a batch of the CC messages you re seeing on MIDI-OX. Mike ________________________________ From: bimmerfan222
Re: [korgpolyex] Re: Successful EX-800 Battery Replacement
2013-07-31 by Michael Hawkins
See instructions here:
Re: [korgpolyex] Re: Successful EX-800 Battery Replacement
2013-07-31 by Jason Adkins
Sorry,I must have missed most of them,I was reading some stuff on the net about fixing contact switches in general,I was thinking if I did it to just use the
Re: [korgpolyex] Re: Successful EX-800 Battery Replacement
2013-07-31 by Sami Jumppanen
Umm yes the list file area has instructions but I did it on my own. And posted about it. I got some (lofi) video of the operation when it was sticky and
Re: [korgpolyex] Re: Successful EX-800 Battery Replacement
2013-07-31 by Jason Adkins
Hi Sami,what did you have to do to clean them,I have never had my EX-800 apart,I guess this has been discussed on here before?
Re: [korgpolyex] Re: Successful EX-800 Battery Replacement
2013-07-31 by Sami Jumppanen
Hi, Jason - fixing the buttons is not that hard. I first thought I could live with poorly functioning buttons, but they were really bad. And after I had
Re: [korgpolyex] Re: Successful EX-800 Battery Replacement
2013-07-30 by Jason Adkins
Hi ya, I think thats what he means.My EX-800 has the same problem on a few buttons,obviously the ones used most,you either have to hit them hard or wiggle them
Maudio midi controller problems..
2013-07-30 by bimmerfan222
Ok, this one has me stumped. I have a Maudio Oxygen 8 V2 that I just picked up. For some odd reason, I cant get the 8 assignable knobs to send proper CC
Re: Successful EX-800 Battery Replacement
2013-07-30 by moses_ybrs
By tact switches do you mean the program buttons? Because yes these keep sticking on and generally not being very cooperative. Haven t looked into it yet
Re: Error 6???
2013-07-29 by snugglepussyisme
Hi Mike, I re-flashed the third block of ROM, and the Error 6 has gone away. Who knows how the data got corrupted in the first place! Thanks for the help.
Re: [korgpolyex] Error 6???
2013-07-29 by Michael Hawkins
Error 6 means there is a difference in the checksum calculation and the checksum value for the third flash ROM. This means you have corrupted data in the third
Re: [korgpolyex] Successful EX-800 Battery Replacement
2013-07-28 by Gordon JC Pearce
... Oi! I m not being sniffy ;-) Replacing soldered-in batteries is the best place to start with repairing your own gear. Next up, sticky tact switches... --
Re: [korgpolyex] Successful EX-800 Battery Replacement
2013-07-28 by Jason Adkins
Nice one man,well done,I hate changing bloody soldered batteries too! If you need the factory presets (poly800) I can send them now as wav but sure you already
Re: [korgpolyex] Successful EX-800 Battery Replacement
2013-07-28 by Gordon JC Pearce
... Feels good, doesn t it? Now you can do your own repairs, at least for some things... You re using an instrument that *you* fixed, that uses a bit that
Successful EX-800 Battery Replacement
2013-07-28 by moses_ybrs
Hooray! Managed to graft a new battery holder on the to pcb of my EX-800 in place of the dead one originally soldered in place. I can now save patches! :D Pic:
EX-800 Error Message
2013-07-27 by Jason Adkins
Hi there, I d be interested to know this too,the only Ex-800 error mine gives is when I try and send a new set of presets with the gain not high or audio not
Error 6???
2013-07-27 by snugglepussyisme
So a few weeks ago a did a photo shoot involving my hawk-modded EX800, and the synth was jostled around more than it s used to, I m sure. Now, when I power it
Re: Allan is not a spam robot
2013-07-27 by moses_ybrs
Not to get off topic but I think I can help you there: http://www.youtube.com/watch?v=46ajVAVvGTQ
Re: [korgpolyex] Re: Allan is not a spam robot
2013-07-26 by Eanna Butler
I think our fellow robot users would prefer sultry shots of daleks... EBu ... I think our fellow robot users would prefer sultry shots of daleks... EBu On Jul
Re: Allan is not a spam robot
2013-07-26 by daveyray913
Brilliant! Happy to hear that because I like spam, and I like robots, but none of us are too keen on spam robots. Unless I suppose you re spamming me sultry
Re: Allan is not a spam robot
2013-07-26 by moses_ybrs
True, but generating spam is not my only function. Just so you knowà
Re: [korgpolyex] Allan is not a spam robot
2013-07-26 by Daniel Forró
I always thought robots could be also EX800 owners :-) Daniel Forro
Allan is not a spam robot
2013-07-26 by Allan Bremner
Hi hi, Just confirming that I am in fact an EX-800 owner and not a spam generating robot. Cheeeeeeeeers! Allan
Re: [korgpolyex] Dead memory
2013-07-16 by Buzwan Handsome
I inserted new batteries and it worked keeping patches. Thanks. ... I inserted new batteries and it worked keeping patches. Thanks. On 15/07/2013, at 19:33,
Re: [korgpolyex] Dead memory
2013-07-16 by Buzwan Handsome
Hey it worked, thanks a lot my friend.
Re: [korgpolyex] Re: Korg Poly 800 DCO problem
2013-07-16 by Sami Jumppanen
Hi, I once fried a cmos (analog) demultiplexer (1 to 8 switch) on Juno-106, which caused one vcf to function erratically. I replaced the vcf hybrid at first :P
RE: [korgpolyex] Dead memory
2013-07-16 by backshall1
Using an AC adapter will not retain the programs in memory after the Poly-800 is turned off. If there is no lithium cell installed, only the six C cells can
Re: [korgpolyex] Dead memory
2013-07-15 by Jason Adkins
Here s a mad idea,put new batteries in the battery holder and use a psu when not using the batteries which will be most of the time,hence will retain programs.
Re: [korgpolyex] Dead memory
2013-07-15 by Buzwan Handsome
I see, thanks, then how could I do that?.
RE: [korgpolyex] Dead memory
2013-07-15 by AKIS AKIS
Hello! The mk1 poly800 (and the reversed keys one) doesn t have a battery inside and doesn t keep the memory on power down (except you have batteries inside
Dead memory
2013-07-15 by Buzwan Handsome
Hello guys I am a new comer into the group, I would appreciate a loti f someone could help me, I recently bought a poly 800, and the issue is that it can not
Re: Korg Poly 800 DCO problem
2013-07-15 by remomatic
thanks. I checked the service manual and schematics in the files section. I think there s no signal input at VCF (IC1) pin 20 and 21. the manual said I should
Re: POLY800 Mod Question: dedicated effects?
2013-07-09 by AARON
I have to admit that the attractive price of the Poly-800 has led me to hoard them a little bit. I ve got several. I see them on eBay all the time, but unlike
Re: POLY800 Mod Question: dedicated effects?
2013-07-09 by daveyray913
Yes, thanks, got those from Radio Shack and they work splendidly. There s several good Vids on youtube for this if anyone needs to see how it works. Pretty
Re: POLY800 Mod Question: dedicated effects?
2013-07-08 by bimmerfan222
all you really need is a simple plunger type Desoldering pump some desolder braid and a small flat screwdriver snag the deslder braid onto the IC pins and tug
Re: POLY800 Mod Question: dedicated effects?
2013-07-08 by daveyray913
Thanks! I ll give that a try. Right now I m just fixing up the body, deciding on mods and waiting for my Hawk kit, and practicing soldering/desoldering on
Re: POLY800 Mod Question: dedicated effects?
2013-07-08 by daveyray913
OUCH. So sad to hear. Ebay(US) lately has them for around $250 USD on ave (MK1), I ve seen EX-800 go for as low as $150, but I supposed shipping to UK is a
Re: [korgpolyex] Re: POLY800 Mod Question: dedicated effects?
2013-07-08 by Gordon JC Pearce
... I did that in an emergency with a ZX81 power supply that was kicking around the computer repair place I used to work at, an hour before a friend s band
Re: POLY800 Mod Question: dedicated effects?
2013-07-08 by bimmerfan222
Something I meant to mention earlier- if you want to use just one power supply for your Alesis and the Poly, just tap a 9v DC supply s transformer direct
Re: POLY800 Mod Question: dedicated effects?
2013-07-08 by gixxer1052
That s the issue with me at present, with a little one on the way in 3 weeks and a three year old running about, I don t get a great deal of time. Give s me a
Re: POLY800 Mod Question: dedicated effects?
2013-07-07 by bimmerfan222
You could get a MIDI CPU from Highly Liquid and make just about any individual knob or switch you wish for HAWK 800 parameter controls. I ve thought of doing
Re: Korg Poly 800 DCO problem
2013-07-07 by bimmerfan222
There s a full set of schematics in the files section here. It indicates where the -5v supply is. Also, your joystick PCB has it printed right on the back of
Re: [korgpolyex] Re: POLY800 Mod Question: dedicated effects?
2013-07-06 by Jason Adkins
Not in the frigging UK are they $200!!!!! try adding another $100 + another $100 for a MKII I love this cunt-try ... Not in the frigging UK are they $200!!!!!
Re: POLY800 Mod Question: dedicated effects?
2013-07-03 by daveyray913
RE: ààThat is a most meritorious idea sir! And BTW, I ordered my Hawk/Atomahawk Kits! After some minor repairs & cleaning I deemed my old, slightly
Re: [korgpolyex] Re: POLY800 Mod Question: dedicated effects?
2013-07-02 by Michael Hawkins
One of these days, I am going to get around to putting an FAQ together. In the meantime, you read the instructions and got your answer. Mike
Re: POLY800 Mod Question: dedicated effects?
2013-07-01 by daveyray913
Nevermind, read the instructions again (more carefully this time) on the ATOMAHAWK kit and found my answer: 5. If you have already carried out the original