On the AtomaHawk board, check to see if the resistor R2 is a 4K7 ohm and NOT a 1K ohm.
I sent out instructions to everybody explaining that the resistor needed to be 4K7. If it was installed with a 1K ohm, that could be the root of the issue.
/Mike
From: "bperkins211@... [korgpolyex]" <korgpolyex@yahoogroups.com>
To: korgpolyex@yahoogroups.com
Sent: Friday, March 2, 2018 9:15 PM
Subject: Re: [korgpolyex] Distorted Output
To: korgpolyex@yahoogroups.com
Sent: Friday, March 2, 2018 9:15 PM
Subject: Re: [korgpolyex] Distorted Output
Hi Mike,
I think I got the one out of the first batch of SMT Atomahawk boards you made.
Odd you mentioned it.. I sometimes wondered if there were settings for the Atomahawk board that was causing the distortion.
Tweaking that pot down helped alot though.
The version I am running is the latest, v2.65l
/Blaine
I think I got the one out of the first batch of SMT Atomahawk boards you made.
Odd you mentioned it.. I sometimes wondered if there were settings for the Atomahawk board that was causing the distortion.
Tweaking that pot down helped alot though.
The version I am running is the latest, v2.65l
/Blaine