Korg Poly800/EX800 Users

Are you going to add the new instructions to
http://launch.groups.yahoo.com/group/korgpolyex/files/4%29%20Modifications/H
AWK-800%20upgrade%20kit/Documentation/ as well? Seems like our group files
should also be kept up to date.

 

Don B.

  _____  

From: korgpolyex@yahoogroups.com [mailto:korgpolyex@yahoogroups.com] On
Behalf Of Michael Hawkins
Sent: Tuesday, July 10, 2012 9:35 AM
To: korgpolyex@yahoogroups.com
Subject: Re: [korgpolyex] where does the 4th capacitor go on boards version
1.5b

 

  

Yeah because I have been so busy with actually making money that I didn't
get time to post the updated instructions.

 

I have already created the instructions, I just haven't posted them on
sourceforge yet.

 

Mike

 

  _____  

From: backshall1 <backshall1@...>
To: korgpolyex@yahoogroups.com 
Sent: Tuesday, July 10, 2012 9:19 AM
Subject: RE: [korgpolyex] where does the 4th capacitor go on boards version
1.5b

 

  

Oops, so that link I just posted is not valid for v1.5.b? Sorry about that.

Don B.

 

  _____  

From: korgpolyex@yahoogroups.com [mailto: korgpolyex@yahoogroups.com ] On
Behalf Of Michael Hawkins
Sent: Tuesday, July 10, 2012 9:13 AM
To: korgpolyex@yahoogroups.com
Subject: Re: [korgpolyex] where does the 4th capacitor go on boards version
1.5b

 

  

John,

 

I may have been slow to ship out the kits but other than that, how has this
been a "really shit deal"?

 

The capacitor goes up in the far upper right hand corner. Right next to the
ten pin 2x5 pin connector labelled "AtomaHawk".

 

Yes, the instructions are slightly out of date. But I did update them and
they will be posted at sourceforge tonight. And yes, the only difference
between 1.5 and 1.5b is the different cap position which I mentioned above.

 

Mike

 

  _____  

From: jcmayer3000 <johnnymayer@...>
To: korgpolyex@yahoogroups.com 
Sent: Monday, July 9, 2012 11:21 PM
Subject: [korgpolyex] where does the 4th capacitor go on boards version 1.5b

 

  

TO MICHAEL:

this has been a really shit deal for me.

your instructions are terrible.

and you're also a turd.

where does the 4th capacitor go on the boards labeled version 1.5b near the
74HC174 chip? there's a total of about 11 points that it could be plugged
into.

an immediate response would be most helpful.