Yahoo Groups archive
Thread
2012-07-10 by jcmayer3000
TO MICHAEL: this has been a really shit deal for me. your instructions are terrible. and you're also a turd. where does the 4th capacitor go on the boards labeled version 1.5b near the 74HC174 chip? there's a total of about 11 points that it could be plugged into. an immediate response would be most helpful.
2012-07-10 by jcmayer3000
by the way, i just noticed that there's no instructions whatsoever for the 1.5b boards. good job. --- In korgpolyex@yahoogroups.com, "jcmayer3000" <johnnymayer@...> wrote:
> > TO MICHAEL: > > this has been a really shit deal for me. > > your instructions are terrible. > > and you're also a turd. > > where does the 4th capacitor go on the boards labeled version 1.5b near the 74HC174 chip? there's a total of about 11 points that it could be plugged into. > > an immediate response would be most helpful. >
2012-07-10 by Gordon JC Pearce
On 10/07/12 04:21, jcmayer3000 wrote: > an immediate response would be most helpful. ... and with an attitude like that, I'm sure you're likely to get one. -- Gordonjcp MM0YEQ
2012-07-10 by Michael Hawkins
John, I may have been slow to ship out the kits but other than that, how has this been a "really shit deal"? The capacitor goes up in the far upper right hand corner. Right next to the ten pin 2x5 pin connector labelled "AtomaHawk". Yes, the instructions are slightly out of date. But I did update them and they will be posted at sourceforge tonight. And yes, the only difference between 1.5 and 1.5b is the different cap position which I mentioned above. Mike ________________________________
From: jcmayer3000 <johnnymayer@...> To: korgpolyex@yahoogroups.com Sent: Monday, July 9, 2012 11:21 PM Subject: [korgpolyex] where does the 4th capacitor go on boards version 1.5b TO MICHAEL: this has been a really shit deal for me. your instructions are terrible. and you're also a turd. where does the 4th capacitor go on the boards labeled version 1.5b near the 74HC174 chip? there's a total of about 11 points that it could be plugged into. an immediate response would be most helpful.
2012-07-10 by backshall1
Oops, so that link I just posted is not valid for v1.5.b? Sorry about that. Don B. _____
From: korgpolyex@yahoogroups.com [mailto:korgpolyex@yahoogroups.com] On Behalf Of Michael Hawkins Sent: Tuesday, July 10, 2012 9:13 AM To: korgpolyex@yahoogroups.com Subject: Re: [korgpolyex] where does the 4th capacitor go on boards version 1.5b John, I may have been slow to ship out the kits but other than that, how has this been a "really shit deal"? The capacitor goes up in the far upper right hand corner. Right next to the ten pin 2x5 pin connector labelled "AtomaHawk". Yes, the instructions are slightly out of date. But I did update them and they will be posted at sourceforge tonight. And yes, the only difference between 1.5 and 1.5b is the different cap position which I mentioned above. Mike _____ From: jcmayer3000 <johnnymayer@...> To: korgpolyex@yahoogroups.com Sent: Monday, July 9, 2012 11:21 PM Subject: [korgpolyex] where does the 4th capacitor go on boards version 1.5b TO MICHAEL: this has been a really shit deal for me. your instructions are terrible. and you're also a turd. where does the 4th capacitor go on the boards labeled version 1.5b near the 74HC174 chip? there's a total of about 11 points that it could be plugged into. an immediate response would be most helpful.
2012-07-10 by Michael Hawkins
Yeah because I have been so busy with actually making money that I didn't get time to post the updated instructions. I have already created the instructions, I just haven't posted them on sourceforge yet. Mike ________________________________
From: backshall1 <backshall1@...> To: korgpolyex@yahoogroups.com Sent: Tuesday, July 10, 2012 9:19 AM Subject: RE: [korgpolyex] where does the 4th capacitor go on boards version 1.5b Oops, so that link I just posted is not valid for v1.5.b? Sorry about that. Don B. ________________________________ From:korgpolyex@yahoogroups.com [mailto: korgpolyex@yahoogroups.com ] On Behalf Of Michael Hawkins Sent: Tuesday, July 10, 2012 9:13 AM To: korgpolyex@yahoogroups.com Subject: Re: [korgpolyex] where does the 4th capacitor go on boards version 1.5b John, I may have been slow to ship out the kits but other than that, how has this been a "really shit deal"? The capacitor goes up in the far upper right hand corner. Right next to the ten pin 2x5 pin connector labelled "AtomaHawk". Yes, the instructions are slightly out of date. But I did update them and they will be posted at sourceforge tonight. And yes, the only difference between 1.5 and 1.5b is the different cap position which I mentioned above. Mike ________________________________ From:jcmayer3000 <johnnymayer@...> To: korgpolyex@yahoogroups.com Sent: Monday, July 9, 2012 11:21 PM Subject: [korgpolyex] where does the 4th capacitor go on boards version 1.5b TO MICHAEL: this has been a really shit deal for me. your instructions are terrible. and you're also a turd. where does the 4th capacitor go on the boards labeled version 1.5b near the 74HC174 chip? there's a total of about 11 points that it could be plugged into. an immediate response would be most helpful.
2012-07-10 by backshall1
Are you going to add the new instructions to http://launch.groups.yahoo.com/group/korgpolyex/files/4%29%20Modifications/H AWK-800%20upgrade%20kit/Documentation/ as well? Seems like our group files should also be kept up to date. Don B. _____
From: korgpolyex@yahoogroups.com [mailto:korgpolyex@yahoogroups.com] On Behalf Of Michael Hawkins Sent: Tuesday, July 10, 2012 9:35 AM To: korgpolyex@yahoogroups.com Subject: Re: [korgpolyex] where does the 4th capacitor go on boards version 1.5b Yeah because I have been so busy with actually making money that I didn't get time to post the updated instructions. I have already created the instructions, I just haven't posted them on sourceforge yet. Mike _____ From: backshall1 <backshall1@...> To: korgpolyex@yahoogroups.com Sent: Tuesday, July 10, 2012 9:19 AM Subject: RE: [korgpolyex] where does the 4th capacitor go on boards version 1.5b Oops, so that link I just posted is not valid for v1.5.b? Sorry about that. Don B. _____ From: korgpolyex@yahoogroups.com [mailto: korgpolyex@yahoogroups.com ] On Behalf Of Michael Hawkins Sent: Tuesday, July 10, 2012 9:13 AM To: korgpolyex@yahoogroups.com Subject: Re: [korgpolyex] where does the 4th capacitor go on boards version 1.5b John, I may have been slow to ship out the kits but other than that, how has this been a "really shit deal"? The capacitor goes up in the far upper right hand corner. Right next to the ten pin 2x5 pin connector labelled "AtomaHawk". Yes, the instructions are slightly out of date. But I did update them and they will be posted at sourceforge tonight. And yes, the only difference between 1.5 and 1.5b is the different cap position which I mentioned above. Mike _____ From: jcmayer3000 <johnnymayer@...> To: korgpolyex@yahoogroups.com Sent: Monday, July 9, 2012 11:21 PM Subject: [korgpolyex] where does the 4th capacitor go on boards version 1.5b TO MICHAEL: this has been a really shit deal for me. your instructions are terrible. and you're also a turd. where does the 4th capacitor go on the boards labeled version 1.5b near the 74HC174 chip? there's a total of about 11 points that it could be plugged into. an immediate response would be most helpful.
2012-07-10 by Michael Hawkins
I would probably just point some links at the sourceforge site. Not that I want the yahoo group to die but Yahoo could do anything over the next year or so. Whereas sourceforge is probably going to exist as long as the Internet exists. Mike ________________________________
From: backshall1 <backshall1@...> To: korgpolyex@yahoogroups.com Sent: Tuesday, July 10, 2012 9:43 AM Subject: RE: [korgpolyex] where does the 4th capacitor go on boards version 1.5b Are you going to add the new instructions to http://launch.groups.yahoo.com/group/korgpolyex/files/4%29%20Modifications/HAWK-800%20upgrade%20kit/Documentation/ as well? Seems like our group files should also be kept up to date. Don B. ________________________________ From:korgpolyex@yahoogroups.com [mailto: korgpolyex@yahoogroups.com ] On Behalf Of Michael Hawkins Sent: Tuesday, July 10, 2012 9:35 AM To: korgpolyex@yahoogroups.com Subject: Re: [korgpolyex] where does the 4th capacitor go on boards version 1.5b Yeah because I have been so busy with actually making money that I didn't get time to post the updated instructions. I have already created the instructions, I just haven't posted them on sourceforge yet. Mike ________________________________ From:backshall1 <backshall1@...> To: korgpolyex@yahoogroups.com Sent: Tuesday, July 10, 2012 9:19 AM Subject: RE: [korgpolyex] where does the 4th capacitor go on boards version 1.5b Oops, so that link I just posted is not valid for v1.5.b? Sorry about that. Don B. ________________________________ From:korgpolyex@yahoogroups.com [mailto: korgpolyex@yahoogroups.com ] On Behalf Of Michael Hawkins Sent: Tuesday, July 10, 2012 9:13 AM To: korgpolyex@yahoogroups.com Subject: Re: [korgpolyex] where does the 4th capacitor go on boards version 1.5b John, I may have been slow to ship out the kits but other than that, how has this been a "really shit deal"? The capacitor goes up in the far upper right hand corner. Right next to the ten pin 2x5 pin connector labelled "AtomaHawk". Yes, the instructions are slightly out of date. But I did update them and they will be posted at sourceforge tonight. And yes, the only difference between 1.5 and 1.5b is the different cap position which I mentioned above. Mike ________________________________ From:jcmayer3000 <johnnymayer@...> To: korgpolyex@yahoogroups.com Sent: Monday, July 9, 2012 11:21 PM Subject: [korgpolyex] where does the 4th capacitor go on boards version 1.5b TO MICHAEL: this has been a really shit deal for me. your instructions are terrible. and you're also a turd. where does the 4th capacitor go on the boards labeled version 1.5b near the 74HC174 chip? there's a total of about 11 points that it could be plugged into. an immediate response would be most helpful.